Available from stock

Due to limited deliveries in 2025, it is wise to buy / reserve this engine early. You do not have to pay a deposit for this reservation, a phone call is enough.

 

Description

New Mercury 60 HP PRO CT (Command Thrust) with an extra high discount.
Engine is still in box. Includes 5 year manufacturer's warranty.

The engine is a 40 / 60 HP version, which means that the hood says 40, but in reality it is a 4 cylinder 60 HP.
This original 60 HP PRO engine (intended for the Italian market, among others) is factory limited to 40 HP because in Italy, among other things, a boat license is required for engines above 40 HP.
After we removed the limitation, it is an original 60 HP engine again.
An original 40 HP Mercury is a 3 cylinder with a displacement of 747 cc and weighs 98 kg.
An original 60 HP Mercury is always a 4 cylinder with a cylinder capacity of 995 cc and weighs 112 kg.

This original 60 HP PRO engine has a Command Thrust tailpiece, making it stronger than a regular 60 HP Mercury.
In Italy it is even sold as a 40/70, but in reality it produces approximately 68 HP and is therefore very suitable for heavier boats.
The tail (rudder surface) of this engine is considerably larger than that of a regular 60 HP Mercury, which also means it steers better at low speeds.
The gear ratio (2.33:1) and 44% larger gears provide more thrust. The desmodromic switching mechanism works extremely smoothly.

Latest model 2024 with fuel injection, power trim, trolling function and electric start.

Engine comes with the latest type of remote control, 2 analogue meters (speed and trim) and propeller.
Of course, all cabling and the 4 engine mounting bolts are included.
Everything new in boxes.

This engine is also available with Big Tiller steering handle .

Technical data

Click here for the technical data of this engine.

Brand	Mercury
Type	F40/60 ELPT CT (long shaft)
Construction year	New
Starting system	Electric start
Electric trim	Yes
Fuel system	Electric fuel injection
Amount of cilinders	4
Cylinder capacity	995cc
Weight	118 KG
Shaft length	Long shaft (L)

 

Price

Recommended retail price of a 2025 Mercury F60 EFI ELPT CT: € 10.885,-

Now for € 7.400,- including remote control, gauges and propeller

 

Options

 

Assembly

Additional assembly cost €350.
Additional assembly cost in bun €500.
Additional charge for installation of hydraulic steering €175.
Only hanging the engine on your boat €75 (connect everything yourself).
Only hanging the engine in the bun of your boat €150 (connect everything yourself).

The assembly costs are calculated per engine.

The assembly is carried out in our workshop in Hellevoetsluis.

 

Assembly examples

On this link you will find (divided by category) various installation examples of new engines and hydraulic controls that we have installed and delivered.
We also do engine installation for boat builders and house boat builders. You will find examples of this at work boats and pontoon boats.
Many of our new engines that we have installed are installed by us on new boats. This is because the boat suppliers are often significantly more expensive.

 

Trade in

Do you want to trade in your engine?

Send some clear photos of your engine with the details below to info@outboardoutlet.nl and we will tell you what the additional amount to be paid is.

- Year of construction
- Engine hours (if known)
- When was the last maintenance
- Any details such as damage or engine problems

 

Hydraulic steering

Engines up to 80 HP:
Additional charge hydraulic steering €500,- (only in combination with the purchase of an engine).
Type: Mavimare GF90BT for enginesup to 80 HP.

Engines up to 150 HP:
Additional charge hydraulic steering €600,- (only in combination with the purchase of an engine).
Type: Mavimare GF150BRT for engines up to 150 HP.

Please note! These hydraulic steering systems can only be supplied at this price if it is purchased at the same time with an engine.

It is not possible to have the hydraulic steering system delivered afterwards for this amount.

 

Propeller service

When you purchase this engine you will receive a propeller that we think is suitable for your boat.

If this size propeller is not suitable for your boat afterwards, you can exchange it for a new one free of charge (provided there is no damage to the old propeller).

It is very important that you sail with the correct propeller because the engine must run at full power between 5500 and 6100 rpm. The choice of propeller therefore depends on the weight of your boat, what type of boat it is and how you will use your boat.

For example, if you are going to use your boat for water skiing, we recommend installing a propeller with a slightly smaller pitch so that the boat accelerates better.

We can supply the most common propellers for this engine from stock.

 

Delivery

Delivered on location throughout the Netherlands excluding the islands for an extra 75 euros.

The engines are delivered and unloaded by our own employees so that you can be sure that the engine will be delivered to you undamaged.

 

Fitting the engine yourself

If you're planning on fitting the engine yourself we can always give you very clear instructions on how to do so.

The following points will be discussed:

- The correct way of drilling the holes in the shaft (with new boats).
- Sealing the engine with the right sealant to prevent leakage and rotting of the mirror.
- Hanging the engine at the correct height.
- Connecting the cabling to the remote control and gauges.
- Connecting to the battery (possibly via main switch).
- Discussing which propeller you need for the best performance. (we often take several sizes of propellers with us so that we can determine on site which one you need)
- Explanation of how to install and correctly adjust the throttle/shift cables.
- Explanation of how to use a new engine.
- Explanation of the manufacturer's warranty.  

If you need a mobile crane to install the engine, you can borrow it from us for free with a deposit of 400 euros.

 

Collecting / viewing

To pick up or view the engine, always make an appointment.

It is also possible to pick up or view the engine on Sunday or in the evening.

To make an appointment call:
+31 (0)181 328785 (also on Sundays)

 

Export

We specialize in exporting outboard engines abroad. The engines we ship are shipped insured and packaged with extra care to prevent transport damage.

The costs depend on the location where the outboard engines need to be sent. If you send us your shipping address, you will receive a shipping quote within 1 day.

As shown on this page, we ensure that each outboard engine is neatly and safely packed so that the motor is well protected when transported abroad.

 

Saver Boats Holland

Veerweg 7
3224 AW Hellevoetsluis
Phone: +31 (0)181 328785
E-mail: info@outboardoutlet.nl
Website: www.outboardoutlet.nl