Available from stock
Due to limited deliveries in 2025, it is wise to buy / reserve this engine early. You do not have to pay a deposit for this reservation, a phone call is enough.
Description
New Honda 60 HP outboard engine with extra high discount.
Engine is still in box. Including 3+2 years manufacturer's warranty.
This engine is a 40 / 60 HP version, which means that the hood says 40 HP, but in reality it is a 3 cylinder 60 HP with a cylinder capacity of 998 cm3 and 12 valves.
This (intended for, among others, the Italian market) original 60 HP The engine is limited to 40 HP from the factory because in Italy a boating license is required for engines above 40 HP.
After we have removed the limitation, it is an original 60 HP engine.
An original 40 and 50 HP Honda 3 cylinder has a cylinder capacity of 808 cm3 with 6 valves and weighs 98 KG and an original 60 HP Honda always has a cylinder capacity of 998 cm3 with 12 valves and weighs 110 KG.
Latest model 2024 with fuel injection, power trim, trolling function and electric start.
Engine comes with the new model tiller handle and propeller.
The tiller handle also contains the controls for the electric trim and trolling.
Of course, all cabling and the 4 engine mounting bolts are included.
Everything new in boxes.
Technical data
Click here for the technical data of this engine.
| Brand | Honda |
| Type | BF40 / BF60 (long shaft) |
| Construction year | New |
| Starting system | Electric start |
| Electric trim | Yes |
| Fuel system | Electric fuel injection |
| Amount of cilinders | 3 |
| Cylinder capacity | 998 cm3 |
| Weight | 110 KG |
| Shaft length | Long shaft (L) |
Price
Recommende retail price of a 2025 Honda BF60 LRTU with tiller handle: € 10.058,-
Now for € 7.200,- (install the tiller handle yourself) or € 7.300,- with tiller handle installed by us.
Options
| Option | Added cost |
| Honda 25 litre fueltank | € 185,- |
| Quicksilver fuel filter / water separator | € 50,- |
| Steady engine bolt lock (SCM approved) | € 79,- |
Assembly
Additional cost for mounting the tiller handle €100.
Only hanging the engine on your boat €75,- (Assemble the tiller handle yourself).
Hanging the engine on your boat and assembling the tiller handle €175.
Assembly is carried out in our workshop in Hellevoetsluis.
Assembly examples
On this link you will find (divided by category) various installation examples of new engines and hydraulic controls that we have installed and delivered.
We also do engine installation for boat builders and house boat builders. You will find examples of this at work boats and pontoon boats.
Many of our new engines that we have installed are installed by us on new boats. This is because the boat suppliers are often significantly more expensive.
Trade in
Do you want to trade in your engine?
Send some clear photos of your engine with the details below to info@outboardoutlet.nl and we will tell you what the additional amount to be paid is.
- Year of construction
- Engine hours (if known)
- When was the last maintenance
- Any details such as damage or engine problems
Propeller service
When you purchase this engine you will receive a propeller that we think is suitable for your boat.
If this size propeller is not suitable for your boat afterwards, you can exchange it for a new one free of charge (provided there is no damage to the old propeller).
It is very important that you sail with the correct propeller because the engine must run at full power between 5500 and 6100 rpm. The choice of propeller therefore depends on the weight of your boat, what type of boat it is and how you will use your boat.
For example, if you are going to use your boat for water skiing, we recommend installing a propeller with a slightly smaller pitch so that the boat accelerates better.
We can supply the most common propellers for this engine from stock.
Delivery
Delivered on location throughout the Netherlands excluding the islands for an extra 75 euros.
The engines are delivered and unloaded by our own employees so that you can be sure that the engine will be delivered to you undamaged.
Fitting the engine yourself
If you're planning on fitting the engine yourself we can always give you very clear instructions on how to do so.
The following points will be discussed:
- The correct way of drilling the holes in the shaft (with new boats).
- Sealing the engine with the right sealant to prevent leakage and rotting of the mirror.
- Hanging the engine at the correct height.
- Connecting the cabling to the remote control and gauges.
- Connecting to the battery (possibly via main switch).
- Discussing which propeller you need for the best performance. (we often take several sizes of propellers with us so that we can determine on site which one you need)
- Explanation of how to install and correctly adjust the throttle/shift cables.
- Explanation of how to use a new engine.
- Explanation of the manufacturer's warranty.
If you need a mobile crane to install the engine, you can borrow it from us for free with a deposit of 400 euros.
Collecting / viewing
To pick up or view the engine, always make an appointment.
It is also possible to pick up or view the engine on Sunday or in the evening.
To make an appointment call:
+31 (0)181 328785 (also on Sundays)
Export
We specialize in exporting outboard engines abroad. The engines we ship are shipped insured and packaged with extra care to prevent transport damage.
The costs depend on the location where the outboard engines need to be sent. If you send us your shipping address, you will receive a shipping quote within 1 day.
As shown on this page, we ensure that each outboard engine is neatly and safely packed so that the motor is well protected when transported abroad.
Saver Boats Holland
Veerweg 7
3224 AW Hellevoetsluis
Phone: +31 (0)181 328785
E-mail: info@outboardoutlet.nl
Website: www.outboardoutlet.nl
Honda 60 HP long shaft BF60 LRTU (including tiller handle steering with trolling and propeller)
Available from stock