Limited availability
Due to limited deliveries in 2025, it is wise to buy / reserve this engine early.
Description
New Mercury 40 HP with extra high discount.
Engine is still in box. Includes 5 year manufacturer's warranty.
This engine is a 40 HP EFI injection 3 cylinder engine with a cylinder capacity of 747 cc and weighs 98 kg.
Latest model 2024 with fuel injection, power trim and electric start.
Engine comes with the latest type of remote control, 2 analogue meters (speed and trim) and propeller.
Of course, all cabling and the 4 engine mounting bolts are included.
Everything new in boxes.
This engine is also available with tiller handle steering .
Technical data
Click here for the technical data of this engine.
| Brand | Mercury |
| Type | F40 ELPT (long shaft) |
| Construction year | New |
| Starting system | Electric start |
| Electric trim | Yes |
| Fuel system | Electric fuel injection |
| Amount of cilinders | 3 |
| Cylinder capacity | 747cc |
| Weight | 98 KG |
| Shaft length | Long shaft (L) |
Price
Recommended retail price of a 2025 Mercury F40 EFI ELPT: € 8.475,-
Now for € 6.300,- including remote control, gauges and propeller
Options
| Option | Added cost |
| Built-in remote control (flushmount) | € 230,- |
| Built on top remote control (topmount) | € 200,- |
| Mercury Smartcraft monitor including cables | € 215,- |
| Mercury Vesselview 403 multi function display | € 950,- |
| Quicksilver fuel filter / water separator | € 50,- |
| Steady engine bolt lock (SCM approved) | € 79,- |
| Gas/throttle cables | Based on length |
Assembly
Additional assembly cost €350.
Additional assembly cost in bun €500.
Additional charge for installation of hydraulic steering €175.
Only hanging the engine on your boat €75 (connect everything yourself).
Only hanging the engine in the bun of your boat €150 (connect everything yourself).
The assembly costs are calculated per engine.
The assembly is carried out in our workshop in Hellevoetsluis.
Assembly examples
On this link you will find (divided by category) various installation examples of new engines and hydraulic controls that we have installed and delivered.
We also do engine installation for boat builders and house boat builders. You will find examples of this at work boats and pontoon boats.
Many of our new engines that we have installed are installed by us on new boats. This is because the boat suppliers are often significantly more expensive.
Trade in
Do you want to trade in your engine?
Send some clear photos of your engine with the details below to info@outboardoutlet.nl and we will tell you what the additional amount to be paid is.
- Year of construction
- Engine hours (if known)
- When was the last maintenance
- Any details such as damage or engine problems
Hydraulic steering
Engines up to 80 HP:
Additional charge hydraulic steering €500,- (only in combination with the purchase of an engine).
Type: Mavimare GF90BT for enginesup to 80 HP.
Engines up to 150 HP:
Additional charge hydraulic steering €600,- (only in combination with the purchase of an engine).
Type: Mavimare GF150BRT for engines up to 150 HP.
Please note! These hydraulic steering systems can only be supplied at this price if it is purchased at the same time with an engine.
It is not possible to have the hydraulic steering system delivered afterwards for this amount.
Propeller service
When you purchase this engine you will receive a propeller that we think is suitable for your boat.
If this size propeller is not suitable for your boat afterwards, you can exchange it for a new one free of charge (provided there is no damage to the old propeller).
It is very important that you sail with the correct propeller because the engine must run at full power between 5500 and 6100 rpm. The choice of propeller therefore depends on the weight of your boat, what type of boat it is and how you will use your boat.
For example, if you are going to use your boat for water skiing, we recommend installing a propeller with a slightly smaller pitch so that the boat accelerates better.
We can supply the most common propellers for this engine from stock.
Delivery
Delivered on location throughout the Netherlands excluding the islands for an extra 75 euros.
The engines are delivered and unloaded by our own employees so that you can be sure that the engine will be delivered to you undamaged.
Fitting the engine yourself
If you're planning on fitting the engine yourself we can always give you very clear instructions on how to do so.
The following points will be discussed:
- The correct way of drilling the holes in the shaft (with new boats).
- Sealing the engine with the right sealant to prevent leakage and rotting of the mirror.
- Hanging the engine at the correct height.
- Connecting the cabling to the remote control and gauges.
- Connecting to the battery (possibly via main switch).
- Discussing which propeller you need for the best performance. (we often take several sizes of propellers with us so that we can determine on site which one you need)
- Explanation of how to install and correctly adjust the throttle/shift cables.
- Explanation of how to use a new engine.
- Explanation of the manufacturer's warranty.
If you need a mobile crane to install the engine, you can borrow it from us for free with a deposit of 400 euros.
Collecting / viewing
To pick up or view the engine, always make an appointment.
It is also possible to pick up or view the engine on Sunday or in the evening.
To make an appointment call:
+31 (0)181 328785 (also on Sundays)
Export
We specialize in exporting outboard engines abroad. The engines we ship are shipped insured and packaged with extra care to prevent transport damage.
The costs depend on the location where the outboard engines need to be sent. If you send us your shipping address, you will receive a shipping quote within 1 day.
As shown on this page, we ensure that each outboard engine is neatly and safely packed so that the motor is well protected when transported abroad.
Saver Boats Holland
Veerweg 7
3224 AW Hellevoetsluis
Phone: +31 (0)181 328785
E-mail: info@outboardoutlet.nl
Website: www.outboardoutlet.nl