Limited availability
Due to limited deliveries in 2024, it is wise to buy / reserve this engine early.
Te koop Yamaha 450 pk met Drive-by-wire en geïntegreerde elektrische besturing ( NIEUW MODEL 2024 )
Motor wordt geleverd incl. 3 jaar fabrieksgarantie.
Technische gegevens:
Merk: Yamaha
Type: XTO 450 NSA met elektronische gas / schakeling, (Drive-by-wire) en geïntegreerde elektrische besturing.
Bouwjaar: NIEUW (MODEL 2024)
Gewicht: 442 kg
Elektrische start
Leverbaar met: Extra Langstaart, Ultra Langstaart of Ultra Ultra Langstaart
Elektronische topschakelkast (nieuw type)
Digitale 5inch info scherm (- geeft alle info van de motor en is ook een brandstof verbruikscomputer.
Verkoopadviesprijs 63.155,- euro inclusief btw en 3 jaar fabrieksgarantie
Meerprijs voor motor in witte kleur: 1.660,- euro
Bijbehorende rigging:
Meerprijs Elektronische Drive-By-Wire topschakelkast, 5 inch info scherm en SBW kit ( steer by wire ). 4.750,- euro.
Meerprijs R.V.S. gepolijste propeller 1.720,- euro.
TOTAALPRIJS: 69.625,- euro inclusief rigging en rvs propeller ( MODEL 2024 )
Voor export 57.541,- euro exclusief btw.
Prijs is voor staartlengte: X en U ongeacht draairichting.
Meerprijs voor E staartlengte: 3.260,- euro ongeacht draairichting.
Staartkeuze:
XR Extra lang met rechtsdraaiende propeller ( 25 inch )
XL Extra lang met linksdraaiende propeller ( 25 inch )
UR Ultra lang met rechtsdraaiende propeller ( 30 inch )
UL Ultra lang met linksdraaiende propeller ( 30 inch )
ER Ultra Ultra lang met rechtsdraaiende propeller ( 35 inch )
EL Ultra Ultra lang met linksdraaiende propeller (35 inch )
Price
Options
| Option | Added cost |
| Built-in remote control (flushmount) + Ignition lock panel + Flushmount engine cable | € 310,- |
| Built on top remote control (topmount) + Ignition lock panel + Topmount engine cable | € 265,- |
| Speed sensor | € 63,- |
| CL5 display | € 705,- |
| Anti-theft system (Y-COP immobilizer kit) | € 495,- |
| Quicksilver fuel filter / water separator | € 50,- |
| Steady engine bolt lock (SCM approved) | € 79,- |
| Gas/throttle cables | Based on length |
Assembly examples
On this link you will find (divided by category) various installation examples of new engines and hydraulic controls that we have installed and delivered.
We also do engine installation for boat builders and house boat builders. You will find examples of this at work boats and pontoon boats.
Many of our new engines that we have installed are installed by us on new boats. This is because the boat suppliers are often significantly more expensive.
Trade in
Do you want to trade in your engine?
Send some clear photos of your engine with the details below to info@outboardoutlet.nl and we will tell you what the additional amount to be paid is.
- Year of construction
- Engine hours (if known)
- When was the last maintenance
- Any details such as damage or engine problems
Propeller service
When you purchase this engine you will receive a propeller that we think is suitable for your boat.
If this size propeller is not suitable for your boat afterwards, you can exchange it for a new one free of charge (provided there is no damage to the old propeller).
It is very important that you sail with the correct propeller because the engine must run at full power between 5500 and 6100 rpm. The choice of propeller therefore depends on the weight of your boat, what type of boat it is and how you will use your boat.
For example, if you are going to use your boat for water skiing, we recommend installing a propeller with a slightly smaller pitch so that the boat accelerates better.
We can supply the most common propellers for this engine from stock.
Delivery
Delivered on location throughout the Netherlands excluding the islands for an extra 75 euros.
The engines are delivered and unloaded by our own employees so that you can be sure that the engine will be delivered to you undamaged.
Fitting the engine yourself
If you're planning on fitting the engine yourself we can always give you very clear instructions on how to do so.
The following points will be discussed:
- The correct way of drilling the holes in the shaft (with new boats).
- Sealing the engine with the right sealant to prevent leakage and rotting of the mirror.
- Hanging the engine at the correct height.
- Connecting the cabling to the remote control and gauges.
- Connecting to the battery (possibly via main switch).
- Discussing which propeller you need for the best performance. (we often take several sizes of propellers with us so that we can determine on site which one you need)
- Explanation of how to install and correctly adjust the throttle/shift cables.
- Explanation of how to use a new engine.
- Explanation of the manufacturer's warranty.
If you need a mobile crane to install the engine, you can borrow it from us for free with a deposit of 400 euros.
Collecting / viewing
To pick up or view the engine, always make an appointment.
It is also possible to pick up or view the engine on Sunday or in the evening.
To make an appointment call:
+31 (0)181 328785 (also on Sundays)
Export
We specialize in exporting outboard engines abroad. The engines we ship are shipped insured and packaged with extra care to prevent transport damage.
The costs depend on the location where the outboard engines need to be sent. If you send us your shipping address, you will receive a shipping quote within 1 day.
As shown on this page, we ensure that each outboard engine is neatly and safely packed so that the motor is well protected when transported abroad.
Saver Boats Holland
Veerweg 7
3224 AW Hellevoetsluis
Phone: +31 (0)181 328785
E-mail: info@outboardoutlet.nl
Website: www.outboardoutlet.nl